Extra-Length Loading Dock Bumpers
Uses/Applications:
- Have unlimited applications in factories, warehouses and docks.
- Vehicle impact protection for loading docks.
- Projecting above low docks.
- Rub rails at the sides of truck wells.
- Wall bumpers to protect against fork lift trucks.
- Special construction features to accommodate unusual anchoring conditions
Features:
- Tough piles of truck tire material virtually eliminates chipping or abrasion, unlike molded rubber, extruded rubber, conveyor belting or wood plank bumpers.
- Attractive deep black color enhances a neat, professional architectural look.
- Manufactured under pressure exceeding 1,500 lbs. to absorb over 80% of impact force.
- Anchor bolts are protected by at least 3" of rubber to prevent damage.
- Maintenance free.
Used on loading docks with dock seals, or where refrigeration or warmth is need. Loading dock bumper and the dock-seal interact to completely seal the truck to the dock.
Model
 |
MODEL | SIZE | WEIGHT |
|---|---|---|---|
| 4.5" Thick Extra-Length Loading Dock Bumpers | |||
 |
B4506-87 | 4.5"x6"x87" | 98 # |
|
B4506-99 | 4.5"x6"x99" | 121 # |
|
B4510-51 | 4.5"x10"x51" | 101 # |
|
B4510-63 | 4.5"x10"x63" | 124 # |
|
B4510-75 | 4.5"x10"x75" | 147 # |
|
B4510-87 | 4.5"x10"x87" | 172 # |
|
B4510-99 | 4.5"x10"x99" | 193 # |
|
B4510-111 | 4.5"x10"x111" | 218 # |
|
B4510-123 | 4.5"x10"x123" | 238 # |
|
B4512-51 | 4.5"x12"x51" | 120 # |
|
B4512-63 | 4.5"x12"x63" | 148 # |
|
B4512-75 | 4.5"x12"x75" | 175 # |
|
B4512-87 | 4.5"x12"x87" | 202 # |
|
B4512-99 | 4.5"x12"x99" | 230 # |
|
B4512-111 | 4.5"x12"x111" | 258 # |
|
B4512-123 | 4.5"x12"x123" | 284 # |
| 6" Thick Extra-Length Loading Dock Bumpers | |||
|
B610-51 | 6"x10"x51" | 126 # |
|
B610-63 | 6"x10"x63" | 154 # |
|
B610-75 | 6"x10"x75" | 182 # |
|
B610-87 | 6"x10"x87" | 216 # |
|
B610-99 | 6"x10"x99" | 244 # |
|
B610-111 | 6"x10"x111" | 272 # |
|
B610-123 | 6"x10"x123" | 307 # |
|
B612-51 | 6"x12"x51" | 154 # |
|
B612-63 | 6"x12"x63" | 188 # |
|
B612-75 | 6"x12"x75" | 223 # |
|
B612-87 | 6"x12"x87" | 258 # |
|
B612-99 | 6"x12"x99" | 299 # |
|
B612-111 | 6"x12"x111" | 333 # |
|
B612-123 | 6"x12"x123" | 374 # |
Detail
About This Product
Note:
- 1/4" flat plates may be substituted for one or both angles.
- If additional anchorage devices are required there is an additional charge for each device.
- Drawings are anchorage devices are available .
Material:
- Durable Laminated Dock Bumpers contain 80% recycled material from fabric reinforced rubber pads cut from selected recycled truck tires.
- Rubber pads laminated between structural steel angles and secured with 3/4" steel tie rods.
Installation:
- Structural mounting angles permit welded installations or provide bolting through steel.
- No assembly required.
Warranty:
-
five year warranty
All Durable Corporation products are guaranteed to be free of defects in material and workmanship under normal conditions of usage, provided our recommended installation and maintenance instructions are followed. We will not be liable for damages in excess of the purchase price of the product.
Terms & Conditions
PDF
